SWR2100P-5G / SWR2100P-10G L2 Gigabit Dante Switch with PoE

SWR2100P-10G SWR2100P-5G
LAN ports Standard IEEE802.3 (10BASE-T/100BASE-TX/1000BASE-T) IEEE802.3 (10BASE-T/100BASE-TX/1000BASE-T)
Number of ports 10 ports 5 ports
Ports available for PoE power supply 9 ports (port 1–9) 4 ports (port 1–4)
PoE standards IEEE 802.3at IEEE 802.3at
Power supply system Alternative A Alternative A
Maximum power supply Per port 30W (Varies depending on the power consumption class of each connected device.) 30W (Varies depending on the power consumption class of each connected device.)
All ports 70W 70W
Compatible PoE powered devices PoE powered devices that comply IEEE 802.3af standards or IEEE 802.3at standards PoE powered devices that comply IEEE 802.3af standards or IEEE 802.3at standards
Switches CONFIGURATION switches for modifying the settings (L2MS switch, Flow control switch, Auto MIDI/MIDI-X switch, Loop detection switch, energy save mode switch) CONFIGURATION switches for modifying the settings (L2MS switch, Flow control switch, Auto MIDI/MIDI-X switch, Loop detection switch, energy save mode switch)
Indicators POWER, PoE LIMIT, LINK/ACT, SPEED, PoE STATE (x31) POWER, PoE LIMIT, LINK/ACT, SPEED, PoE STATE (x16)
Operating environment Ambient temperature: 0 to 40 °C, Ambient humidity: 15 to 80% (no condensation) Ambient temperature: 0 to 40 °C, Ambient humidity: 15 to 80% (no condensation)
Storage environment Ambient temperature: -20 to 50 °C, Ambient humidity: 10 to 90% (no condensation) Ambient temperature: -20 to 50 °C, Ambient humidity: 10 to 90% (no condensation)
Power supply voltage, frequency AC100 V to 240 V, 50 Hz/60 Hz AC100 V to 240 V, 50 Hz/60 Hz
Power consumption 90 W 86 W
Dimensions W 220 mm (8.66 in) 220 mm (8.66 in)
H 40.5 mm (1.6 in) 40.5 mm (1.6 in)
D 250 mm (9.8 in) 250 mm (9.8 in)
Weight 1.8 kg (4 lbs) 1.6 kg (3.5 lbs)
Accessories Owner’s Manual; power cord; power cord clamp; feet Controls and Owner’s Manual; power cord; power cord clamp; feet Controls and

Controls and Connectors

The functions which can be set via the CONFIGURATION switches are as follows.